6pk-10″-80t — RENEGADE “RAZOR” / HYBRID — COMBO Specialty — 254mm – $93.00


6pk-10″-80t — RENEGADE “RAZOR” / HYBRID — COMBO Specialty — 254mm



UNIVERSAL FIT — each blade comes with a “REDUCER WASHER” allowing blades to fit either 1″ (25.4mm) or 20mm Arbor Hole sizing with your “Blade Hardware”. You can measure “Washer” thickness with a Caliper, the Washer is the exact thickness of the blade and will even smash somewhat when firmly tightened………..BLADE HARDWARE: A Blade will not fit onto the Trimmer Axel Shaft by itself like the String Line Dispenser Spool will. So you must acquire “Blade Hardware” that consists typically of two small discs; one has a raised circle on it that the blade hole fits onto, the 2nd small disc is the cap disc, then screw on the Nut and apply a Cotter Pin. Sorry, we DO NOT supply blade hardware.

CARBIDE — is estimated to last 10x longer than plain steel but does not cost 10x more creating incredible value. The CARBIDE MIX in our teeth is proprietary and 2nd to none. Just Tungsten is not enough; additives like: Hafnium, Tantalum, Titanium, Molybdenum, Silicone, Zirconium, Boron, Niobium, Chromium, & Vanadium, make for a better Carbide Mix for longer lasting teeth. RENEGADE BLADE® is the ONLY Carbide Brush Blade BRAND on Amazon that has a {REPORT} from the foremost Testing Laboratory: UL, LLC.

[<1>] We Offer <TWO-specialty> type |-{STANDARD}-| Brush Blades: …… (1)— MULTI-USE BLADES: Our 80, 100 & 120 teeth blades are handy for ANY job such as: Pruning, Hedging, large Limb cutting as well as for Brush & Brambles. MORE teeth means more aggregate cutting surface (more carbide for the $$) and therefore less seizing in limbs and less tearing and ripping when hedging (best at high rpm’s) (teeth length = 5mm apx)…… (2)— BRUSH & BRAMBLES specialized BLADES: Our 32, 36 & 40 teeth blades are more tailored for Brush & Brambles due to deeper teeth cavities than our Multi-use blade. LESS teeth are required to create deeper wider teeth cavities, that can grab & cut more brush material per blade spin (best at alternating rpm’s). NOTE: Both blade types will cut all garden material but tend to be a tad better within their respective SPECIALTY. (teeth length = 5mm apx).

[<2>] We also Offer <TWO-specialty> type ||-{HYBRID}-|| Brush Blades: …… (1)— GST-RAZOR “HYBRID” (red color): Our 56, 68 & 80 teeth blades are handy for most jobs such as: Pruning, smaller Limb cutting as well as for Brush & Brambles. This HYBRID is a unique COMBO blade design. It comes with a unique blend of medium teeth count coupled with “sharpened” U-Cavities for brush work. This blade is a blend (COMBO) of two specialties in one blade, {Multi-Use} and {Brush& Brambles}. NOTE: The carbide teeth are smaller and narrower on this blade for less FRICTION coupled with SHARPENED U-CAVITIES (the only blade that offers this unique aspect) (teeth length = 4.5mm apx)……. (2)— HAWK “HYBRID” (blue color) – 20 teeth blades tailored for Brush Only &/or some Brambles work. This HYBRID blade {design} has Carbide teeth that are larger in aggregate SIZE (wider and taller teeth) and more reinforcing behind each tooth than any Carbide teeth we offer. You’ll note that this blade comes with a jagged leading edge and angular squared groove teeth cavities that direct brush to the back lower corner of each groove-cavity that then directs BRUSH up into lower-seated reinforced cutting tooth. Suitable for hacking through fields of brush. NOTE: Less tooth count creates more spacing for deeper wider (brush grabbing) U-CAVITIES, that can grab & cut more brush material per blade spin (best at alternating rpm’s). (teeth length = 6.5mm apx).